Pioneerpos AT Commands G24-LC User Manual download pdf (Page 168)

100

101

SMS

3-104 G24-L AT Commands Reference Manual April 15, 2008

Table 3-64: Layout of SMS-SUBMIT in PDU Mode: (according to GSM03.40)

Reference Description Length

<sca> Service Center address:

1 BYTE: length (number of followed

octets). Mandatory

1 BYTE: <tosca> - value between

128-255

1, 3-12 BYTES

(When length is 1, length BYTE = 0 )

<fo> First Octet. See the table below. 1 BYTE

<TP-MR> Message Reference. An integer

representation of a reference number of

the SM submitted to the SC by the MS.

Values between 0-255.

1 BYTE

<TP-DA> Destination address formatted according

to the formatting rules of address fields.

2-12 BYTES

<TP-PID> Protocol-Identifier. Values between

0-255.

1 BYTE

<TP-DCS> Data Coding Scheme. Values between

0-255.

1 BYTE

<TP-VP> Validity Period. depending on <fo>,

TP-Validity-Period-Format bits setting.

0, 1, 7 BYTE

<TP-UDL> User data length 1 BYTE

<TP-UD> User data 0-140 BYTES

Table 3-65: Layout of SMS-COMMAND in PDU Mode: (according to GSM03.40)

Reference Description Length

<sca> Service Center address:

1 BYTE: length (number of followed

octets). Mandatory

1 BYTE: <tosca> - value between

128-255

1, 3-12 BYTES

(When length is 1, length BYTE = 0 )

<fo> First Octet. See Table 3-66.1 BYTE

<TP-MR> Message Reference. An integer

representation of a reference number of

the SM submitted to the SC by the MS.

Values between 0-255.

1 BYTE

<TP-PID> Protocol-Identifier. Values between

0-255.

1 BYTE

<TP-CT> Command Type 1 BYTE

<TP-MN> Message Number 1 BYTE

<TP-DA> Destination address formatted according

to the formatting rules of address fields.

2-12 BYTES

1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 443 444

Comments to this Manuals

No comments

Pioneerpos AT Commands G24-LC User Manual Page 168

Comments to this Manuals